-
While using the adc_dt sample with an Atmel SamE51 board with multiple adc inputs, I noticed that all channels were reading from the same mux input on the ADC.
Inspecting adc_sam0.c reveals that the…
-
-
An annoying barrier to entry for new users is QMK Toolbox's behaviour with Atmel chips. I know unlike other MCUs they must be selected manually, but this is quite a typical event when dealing with IBM…
-
Hello!
This is not a bug report for this project, rather a question regarding the Atmel fitters which you might have some input on since you probably have been using them a lot more that I have.
…
-
**Describe the bug**
I have been trying to erase the end of flash on an Atmel Sam4s(8b) using the current sam flash driver. When you attempt to erase the last page the driver returns an EFAULT error …
-
**To Reproduce**
```
west build -p -b sam_e70_xplained/same70q21 samples/drivers/counter/alarm -T sample.drivers.counter.alarm
```
**Logs and console output**
```
-- west build: making build dir…
-
I've been using this platform for a while, and I just want to say I'm thoroughly impressed with the completeness and features that have been built here. Huge thanks to everyone who has dedicated their…
-
I am using the latest Atmel Studio 7 with genuine Arduino.cc Zero boards. When I moved to Atmel Studio 7 it was required that the EDBG firmware update to version 3.25. Some of my boards upgraded fine …
-
I tried to follow the instructions (https://github.com/MCUdude/microUPDI), but I'm having some issues.
> Usage
> After the Pro Micro is flashed with mEDBG firmware it will present itself to the co…
-
I don't understand what is the function (atmel side) which send "nextReponse" to the raspberry by SPI