-
I try to flash though avrdude but my ats20+ always reboot while this process going. I also tried AVRDUDESS though mono with the binutils-avr package and avrdude but my ats20+ just reboot and all what …
-
This works fine on my ATS20+ but the battery divider is already installed to pin A1 on ATS20+ and not pin A2, changed in _defs.h_ to _"#define BATTERY_VOLTAGE_PIN A1"_ and the charging indicator work…
-
Vincent I want to thank you for the excellent work you did with the swling.ru firmware!
I'm asking you about the list of bands that the originals firmware had with this format:
_Band band[] = {
…
-
Can do match the ats20+ to sintonize and hear Air band in AM Mode?
118mhz - up
-
Hi
Your instructions for where to attach the battery sensing hardware could cause problems if the radio was not used for a long time.
Specifically the instruction to connect **directly** to the …
-
Much appreciation for the work.
I noticed a 1.5 kHz downshift for correctly when listening to a station in SSB.
Can you fix this?
BFO = 0.
Checked with professional shortwave equipment.
Bes…
-
### STOP! ATS 20+ users!
The below isn't needed!
**G8PTN** has pointed out that it HAS the needed resistors already on the A1 pin of the device...
Please follow his advice, and leave your solderi…
-
Ok everything was working great until the second V1.14 and up. The first V1.14 worked and all down.
The first V1.14 March 26 worked. I went back to GitHub there was second V1.14 March 27 on loading …
-
Hi, i just picked u this radio kit to try with an RTK facet as a 915MHz local correction system. In trying this out, I have been unable to get valid RTCM data over the serial link. The modules and con…