-
Hi guys, just to inform you that we had the same problems, but the cause wasn't related to the software.
We used some pl2303 usb-serial converters with the 'low' level too high to be reconnized by th…
-
Normally fuse bits are defined like
```
#define FUSE_SOMETHING (unsigned char)~_BV(some_n)
```
For the list of parts below gcc v12 defines a lot of them *without bit inversion* `~`
```
atmega1…
-
For those of us that don't want to modify it, but "just drop it in and go", it would be nice to have something that is already known to work with a standalone programmer.
I can export a hex file fr…
-
MCU auto-detect doesn't always work, depending on the programmer and MCU programming interface.
Auto-detect works by running avrdude with the chosen programmer and MCU set to ATmega8, since avrdude…
-
Hello SaabFAN,
I'm interested in building your Prescaler Board to retrofit a PM6652 Counter with the channel C option, but I think this project is currently missing the source code for the Attiny y…
-
http://forum.arduino.cc/index.php?topic=580188.0
THe OneWire_direct_gpio.h file contains code like:
```
#if defined(__AVR__)
#define PIN_TO_BASEREG(pin) (portInputRegister(digitalPin…
-
Right now we're calling `form` and `rustfmt` to split out the auto-generated modules into many files. I don't think this provides much value as nobody is going to look at those file anyway.
I have…
Rahix updated
4 months ago
-
Hi there,
I bought the following magnetic door/window sensors from Alieexpress.
https://de.aliexpress.com/item/1005006306150712.html
The have a different (maybe newer) board layout and sensor.
Bu…
-
### Describe the problem
The Arduino language features are not available after startup.
### To reproduce
- Have no attached boards,
- Start IDE2,
- Select `Arduino Uno` board (can be any),…
-
* Using Arduino IDE 1.18.13, as recommended.
* MegaTinyCore version 2.6.10.
* Compiling to ATTiny402. (Also tried on ATTiny202, so this looks to happen independent of target chip.)
You can select…