-
This may affect other variants, but was discovered and tested using an ATtiny817.
megaTinyCore release 2.6.10
Example sketch to demonstrate issue:
```cpp
// attiny817 PWM pins: 0, 1, 9, 10, 11, …
-
The new [ATTINY series](http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-42721-ATtiny417-814-816-817_Complete.pdf) are very cheap and powerful micro-controllers. They even have 8 bit DACs on boar…
-
I am struggling to get the ATtiny816 to respond as a OneWire device to an ESP32 master. Running the DS18B20 example.
Background info:
The bus and master physically work. I have another real DS18B2…
-
Hi, I am working on a C pi lib for [this quad-encoder seesaw thing](https://www.adafruit.com/product/5752), and have been trying to reverse-engineer from working python-code, but I noticed an error w…
-
IDE: 1.8.13
mTC: Github version
Board: Xplained Mini ATtiny817
Windows 11 64bit
I think I saw a similar issue [here](https://github.com/SpenceKonde/megaTinyCore/issues/849) for the Attiny1604
…
-
Normally fuse bits are defined like
```
#define FUSE_SOMETHING (unsigned char)~_BV(some_n)
```
For the list of parts below gcc v12 defines a lot of them *without bit inversion* `~`
```
atmega1…
-
Hi,
i'd like to add support for the Atmel STK-600 and the new ATMega324PB, ATtiny817 devices also.
how do i add a framework for the native avr-gcc?
---
Want to back this issue? **[Post a bount…
syddo updated
7 years ago
-
Hi,
I am having a bit of a fight here with the `I2c` trait in `embedded-hal` 1.0.0.
Let's suppose I have an I2C EEPROM that I just sent some data for writing to. The EEPROM needs some time after…
-
-
I've been trying to implement a `Usart` type for ATtiny167 and have been running into typing hell trying to do that.
The `avr-hal-generic` crate currently contains the `Baudrate` struct that comput…