-
Bed levelling inaccurate due to filament residue on the nozzle. the preparation is not the same as with the original software, i think it is better solved there so that no filament remains on the nozz…
-
Hello. Thank you for the firmware branch. I got my BL Touch installed on my Sapphire Pro... and I got the Z-offset set. However, I am running into few issues:
Essentially, it appears the Z-offse…
-
Printer: Qidi Q1 Pro
Firmware: 4.4.21
Problem: The print head is either too close to or too far from the bed.
Details:
When I start a print, the printer automatically cleans the nozzle and cal…
-
Hello, I've got a problem I thing with this auto bed levelling function. I have BLtoutch sensor and no mater what I do the ABL is not probing twice for every point, it does ok two probes for the middl…
-
Anyone with skr mini e3 and ABL kit can make a guide what is needed to change in the firmware?
I try follow the marlin but when put g29 after g28 the printer halted
-
Hi there,
I am using printer with build platform size 500mm x 500mm and inductive proximity sensor. I am trying autobed levelling with Gcode G32 S2 with grid size 7 but i am getting error of .5 to 1 m…
-
(DE) Hallo knutwurst, ich habe alle Schritte genau befolgt, jedoch spinnt mein Kossel Linear Plus (keine Ultrabase, Probe Typ 1 mit -19.00 Offset ) beim Auto-Bed-Leveling (Configuration -> Delta Calib…
-
When auto bed leveling, possibly as I have installed a larger carriage, the carriage hits the frame of the printer. This is additionally problematic as my bltouch probe is positioned on the right side…
-
Hello
**Describe the bug**
I have followed your procedure step by step
G28
G29
G1 X110 Y110 Z5
Lowered the head and got the value of the Z & added M851 - Z-2.7 (in my printer)
M500
Tested:…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I have test the latest Bugfix and the Biqu MicroProbe Version and all have the same result as…