-
@vincedarley I recently created an ESP32 based replacement for the Balboa WifI module, [esp32_balboa_spa](https://github.com/NorthernMan54/esp32_balboa_spa) so that I could control it from Homebridge …
-
I've just tested the new version 2.1.5 with my Balboa spa BP2100G1, but sadly no values are reported via MQTT.
The log output only shows the following:
I, to spa: #
I, to spa: #
Before I…
-
Hi!
Thanks for creating this project.
We have a Balboa GS500Z connected to a CalSpas 407T panel.
The PCB has RJ connectors and one 8-pin Molex.
The documentation shows the pcb: https://www.b…
-
**What kind of device or service you would like to see an adapter for?**
Balboa Spa/Whirlpool
**Is the device connected to the internet or only in the local network available?**
Both
**Is an o…
-
I'm running Balboa Spa client on my phone and for Pump 1 I can turn it on (defaults to low) and then also turn it to high from the iOS client, in HA I'm only given a binary switch with attributes for …
-
Hi, I have been using the Balboa integration that is native to Home Assitant, but its a bit limited so I want to uses yours, however even though I have removed the HA Native Balboa Integration, I am g…
-
Hi Mika.
I'm still and excessively using your integration to control my spa (automatic heating when enough solar power is available).
As sometimes the Balboa server was/is down I implemented a check…
-
@plmilord jmoor3 Any chance you guys are also planning to push all these features and functions to the upstream "Balboa Spa Client"?
https://www.home-assistant.io/integrations/balboa/
https://gi…
Hedda updated
5 months ago
-
@arska Would you consider writing a native "ControlMySpa" integration component for [Home Assistant](https://www.home-assistant.io/) based on this library?
https://community.home-assistant.io/t/int…
Hedda updated
3 months ago
-
Thank you so much for your work!
With a few modifications i also got it to work on M5Atom with RS485.
https://shop.m5stack.com/products/atom-rs485-kit
![1_78a0bfc5-be79-439e-afab-7096c38d3683_1200x…