-
Hello!
I must say you inspired me a little. Was thinking of making project like this for very long time but never had time to figure which eInk screens would work best and get drivers working.
I s…
-
SDK Version : Latest
File location : api_event.h & api_inc_pm.h
typedef enum{
PM_CHARGER_STATE_DISCONNECTED = 0,
PM_CHARGER_STATE_CONNECTED = 1,
PM_CHARGER_STATE_CHR…
Trion updated
1 month ago
-
Dear fellows,
I have the T-SIMCAM OV2640 and the SIM7600G-H, which has the TP4056 battery charger, this charger only has a blue LED, I've seen other TP4056 that has a green and red a LED to know if…
-
Need to figure out some options for replacing or fixing the main Li-Ion batteries in Hail Bopp.
**Specs:** Brammo batteries (no longer in production, company acquired by Cummins). 29.8V + 14.8 V ba…
-
Several times now, our SLA battery (the one that looks like a car battery) has been fully discharged. I had thought we eliminated all parasitic leaks, but possibly one or more remain. The problem wi…
-
hi, Tinfever, I have been using your firmware for half a year and it is very good. I have also learned a lot of BMS knowledge. Today, I found a new problem. When the battery is charging, the charger i…
-
Currently, a significant proportion of Volvo engine hours are spent simply charging batteries at anchor -- using a 75 hp diesel to run a 2 hp alternator is madness!! - it takes up to 3 hours to charg…
-
According to the docs describing the charging state, the final charging state should be `END_OF_CHARGE` or `DONE`.
https://github.com/arduino-libraries/Arduino_PowerManagement/blob/7ba266c0649e12f4…
-
When the battery is full, the charger floats the battery.
When the battery drops below 18.9V, the charger tops the battery off.
18.9V corresponds with approximately 60% battery level. The mower refu…
-
I didn't bother pulling any of the config pins low, and it worked OK with a Dell Latitude 3379. (Core i5)
i.e This labtop seems to accept the Arduino sending it the data for a 130W charger, even th…