-
Hi, I've had some issues with the libVLC demo code for the Bebop (using bebop 2 and windows 10):
Almost the whole lower half of the stream's pictures is in ultra low resolution, whereas the rest is f…
-
Does anyone konw why the twist.twist.angular.z (Rotational angular velocity) is always 0 par degrees? Even when the drone is rotating well.
And is it possible to change the speed when the drone is mo…
-
Hi,
I would like to use the bebop_autonomy but through an external access point (router).
My router is unsecured.
I tried [this script](https://github.com/Parrot-Developers/Samples/wiki/Convert-B…
-
It would be good to add support for uploading firmware to the Bebop2.
Instructions are in the "Uploading the firmware" section of this wiki page: http://ardupilot.org/dev/docs/building-for-bebop-2.ht…
-
Hi.
I made my own navigation code that subscribe "/bebop/fix" topic.
It always works when bebop2 is not flying. But after bebop2 taking off, the data (latitude, longitude, altitude) is fixed. ("…
akhkh updated
5 years ago
-
bebopVision.open_video() won't return current images. All I get were the old images.
-
These sensors are nominally 180deg vert x 180deg horiz and are as such, neither really fisheye nor spherical cameras.
Does OpenSFM have a lens model that can accommodate this type of data? Is it mo…
-
Hi! I am new at machine learning and my question can be stupid, but how can I use your learned network in my own simulation with bebop2? I am using parrot sphinx and bebop_autonomy, I have world with …
-
When I tested several frames on the nps (JSBSIM) simulator (fe8bbd3bb03e7a78270add64030c833d8e278d8e), I noticed several unexpected behaviors.
I am not sure whether these are unknown issues or not. J…
-
Hi,
I have compiled and installed the module on a Bebop 2 and all works fine until I try to bring the interface up. The bebop2 just restarts without issuing an error message.
With which firmwar…