-
The device can join LoRaWAN network and I can send a downlink packet.
![image](https://github.com/ElectronicCats/Beelan-LoRaWAN/assets/29994971/27bb59e1-565e-460a-bfb4-ff4988c2bcd5)
The device "he…
-
Hi @ricaun ,
I've trying to use your library in a WemosD1 mini board (ESP8266) with RFM95 LoRa.
When executed **ttn.loop();** I'm getting a watchdog reset:
```
wdt reset
load 0x4010f000, …
-
Hello,
I intend to send and receive data using Class C but except for join request acceptance nothing is happening.
No payload is sent and received. serial monitor says only "joining", nothing else.…
-
I used ESP32+RFM95, code in arduino IDE and Gateway-8-channel PG1301. I run it at SF7->10 and it doesn't have any errors
![image](https://user-images.githubusercontent.com/86216202/227155011-dabd6d…
-
**How to send/receive on STM32+SX1278 board?**
I'm sure my STM32 board works fine.
Can I ask for your opinion on the direction and how to fix it to be able to transmit and receive on the STM32 boar…
-
### Platform
NRF52, ESP32
### Description
The LoraWAN module sends sensor data from Meshtastic nodes to LoraWAN gateways in parallel.
The coverage with LoraWAN is sometimes much higher than with…
-
Hello, I am currently using a stm32f103 (bluepill) on an ultra low power system. I would like to know if there is any way to save the credentials after the Join.
I am using the stm32 in shutdown mo…
-
ABP Mode, Class C
When I receive downlink, periodically this message repeat itself, then after a few minutes I receive the same downlink.
Any solution for this?
-
Hello there!
Despite poorly written documentation, I managed to get this lib up and running with my NodeMCU v3 and RFM95W. I had to play around with different wiring setups and utilize different li…
-
Hello,
First of all, thank you for your easy-to-use library. I have been using it with LILYGO TTGO LoRa32 module and it has been working perfectly.
I wanted to ask if there was any plan in the f…