-
-
# BIGTREETECH CB1 - Review | TinyComputers.io
[https://tinycomputers.io/posts/bigtreetech-cb1-review.html](https://tinycomputers.io/posts/bigtreetech-cb1-review.html)
-
Good afternoon!
Please add an electrical diagram for EBB SB2209_USB
Thanks!
-
https://biqu.equipment/products/bigtreetech-eddy
Further analysis needs to be made to see how it would hook into the can bus system EBB36 EBB42 CAN or I2C Port Board before creating a an adapter bra…
-
Good moring to all,
I am found of BIGTREE product, and during the process of upgrade a Ortur 4 printer with following components I have a printing issue with my new S42C driver.
on each layer, y…
-
![DSC04309](https://github.com/geerlingguy/sbc-reviews/assets/481677/47cbd747-d310-4480-8ce7-9ef3439d789f)
## Basic information
- Board URL (official): https://bigtreetech.github.io/docs/CB1.h…
-
If you connect the Panda Touch to the P1S and turn on the printer, the response speed is sometimes slow. (This may only apply to mine.) In that case, after RESTARTing Panda Touch, the response speed c…
-
I know this is probably a big ask, but I'm hoping that supporting the bigtreetech CB1 would be possible.
The CB1 is a board similar to the Raspberry Pi Compute Module 4 but, you know, [available at…
-
In https://github.com/bigtreetech/BIQU-BX/commit/475c6b5c8923bfd69c9bd2a1bae81f4b93301507, the config was changed to use a single Z driver & PT100/PT1000 with MAX31865.
Examples:
https://github…
-
New model?
Anyone tried it?