-
Hello, I am intending to mount a BIQU microprobe to my k1 max and I worked out that if the probe is turned 180 degrees, you can get a slighly lower offset on x (about 4 mm). I haven't managed to test …
-
Thank you for this fantastic work.
I am writing to report a bug that I encountered while attempting to update. Specifically, I receive an error on line 798 during the update process.
```
Running …
-
DAO, UbiquityDAO.
-
The BTT TFTs have a manu for manually testing the BlTouch probe. In there you can test the probe, deploy it, stow it..., but there is currently no support for the Biqu Microprobe. Since the Microprobe…
-
I have a modified Creality CR10S Pro with Bigtreetech SKR3 EZ and EBB36 using Klipper USB to CAN bus bridge and the EBB setup for CAN bus.
I use a Bl-Touch connected to the EBB36 and a Voron Sexbol…
-
After install of Klipper etc after the description i get a load of errormessages. The first: Klipper Reports: /home/biqu/printer_data/config/options/probe/stock.cfg .. Im using the stock probe!
-
### Did you test the latest release build?
Yes, and the problem still exists.
### Bug Description
When trying to home the Z-Axis withe Biqu MicroProbe, the printer simply climbs the Z rail 10mm at …
-
Is the SO3 tool board compatible with BTT BIQU Microprobe?
I have a 3D Touch (BL Touch knockoff) connect and working. I am trying to replace with the BIQU Microprobe (v2). I added the Klipper code …
-
Mám firmware: V27.x Mar 272022 in 120Mhz, po instalaci na tisk 2 vlákny mi nejde nahrát nové firmware abych zprovoznil tisk 2 vlákny.
Prosím o informaci které firmware mám nahrát do tiskárny.
-
In https://github.com/bigtreetech/BIQU-BX/commit/475c6b5c8923bfd69c9bd2a1bae81f4b93301507, the config was changed to use a single Z driver & PT100/PT1000 with MAX31865.
Examples:
https://github…