-
Hi all,
I'm using a BlackFly-S USB camera and have it synced with an Ouster LiDAR using hardware sync. The camera receives pulses at a frequency of 10 Hz from the LiDAR.
I've set the below parame…
-
Hello,
Could you please let me know the interface from ptGrey GigEVision Blackfly camera to jetson tx2 board?
Is it using the ethernet interface?
-
**Describe the bug**
Since upgrade to aravis 0.8 (from 0.6) reading chunk data does not work. I also tried the given example code (https://github.com/AravisProject/aravis/blob/main/tests/arvchunkpars…
-
**Describe the bug**
I have a Blackfly S BFS-US-16S2M connected over USB3 to a powerful computer running Ubuntu 22.04. If I point the camera to a blinking pattern on the screen, and then open the ara…
-
Hello, I am considering using this ros package with a Blackfly S camera and I wanted to confirm compatibility before proceeding. Could you please let me know if this ros package supports the blackfly …
-
For the ar tag tracking node to work properly, we need to calibrate the camera using the following package:
http://wiki.ros.org/camera_calibration
The output from running the node should be converte…
-
After selecting the camera through GenICam (Blackfly S USB3), I experience significant lag in the software on our windows PC, where it may take several minutes to respond to an input. I'm now experien…
-
**Bug**
I have two Blackfly cameras and I am able to launch a camera nodelet manager that starts two separate Spinnaker camera nodelets that stream at 40FPS. 20-50 minutes in of run-time the image_ra…
-
This appears to be happening when PXIe system continuously cycles while CsPy does not acquire data. (PXI communication box checked).
Blackfly server intermittently retrieves wrong image buffer pos…
-
**Describe the bug**
I see occasional corruption artefacts in images taken with Aravis from a PtGrey BlackFly GigE camera. These are visible as one or a few horizontal stripes of mismatching color in…
ghost updated
4 years ago