-
| Description | Field |
|:---------------------|:---------------------------------------|
| Datasheet component | [link or attachment ] |
…
-
**unable to configure PWM on teensy 4.1**
i am trying the "samples/basic/servo_motor" example for teensy41 board, below have attached the overlay for teensy41 but when i build the same i get error.…
-
## Task description
Check the possibility of setting the option bytes automatically at the end of the test.
## Definition of Done
- [ ] feature added and tested
cc @valegagge @marcoaccame @mag…
-
This board from Classy Walk hoverboard and has a GD32F130, FORTIOR FD6287T GA1015 and a NCE01P13K 1PKL2. It's marked with OLSZ 0L20190703-V4.1
## Master
![P_20240825_205058](https://github.com/use…
-
As per the title, we need to add test support for `AMC-BLDC` boards.
```[tasklist]
### Tasks
- [ ] test firmware released
- [ ] new IPTS release produced
```
cc @Nicogene @maggia80 @marcoacc…
-
Bisognerebbe sostituire alcune indicazioni:
**1)**
quelle attuali
![MicrosoftTeams-image (34)](https://github.com/icub-tech-iit/ipts/assets/53309443/506fd304-b3f3-4af4-b2b1-ae0c500d2f65)
c…
-
Greetings. I am using a Moteus C1 to control some BLDC motors (as one does). I have noticed that the motor will sometimes stall at higher speeds (there is no load on the motor shaft). Is there some se…
-
The datatypes/message types used here https://github.com/vedderb/bldc are incompatible with the ones used in this project
-
```
BLDC control can be done totally on hardware by using logic gates which
actually requires more space for the pcb but may be more robust than the
software running to control phase excitations of ea…
-
- https://github.com/madcowswe/Servo
![](https://camo.githubusercontent.com/beebe492cced4ada2046e786a958af7caaec998a/68747470733a2f2f6a2e676966732e636f6d2f6c5978376b362e676966)