-
Hello there, i was trying to design my own pcb board for brushless motors control based on stm32, and i was wondering if i can use a already made firmware like BLHeli32, but i dont find and cant uplou…
-
### Description
I see that [bluepills cpu definitions](https://github.com/renode/renode/blob/master/platforms/cpus/stm32f103.repl) don't include CAN like [STM32F4 does](https://github.com/renode/re…
-
I've recently bought two different lots of bluepills that don't work with this bootloader but they work fine with the STM32duino-bootloader, and user space USB works too.
The chips are marked as STM3…
f3sty updated
16 hours ago
-
@Hello,
I am trying to get this to work on a standard bluepill board without success.
Getting "Timeout: No data received from target" Error
What I tried so far:
-Using the precompiled firmware…
-
Hello,
My blue pill contains a chip of stm32F103c6t6.
I am using STM32 core by STMicroelectronics (Arduino IDE).
I followed all the processes of installing this HID bootloader. But when I connect t…
-
Hi Eric
I want to compile the latest stable of antenna tracker with bluepill,but can not be done!
Documents/Arduino/libraries/SoftwareSerial/src/SoftwareSerial.cpp:45:30: fatal error: util/delay_ba…
-
i flashed the bluepill with freejoy and read config from device which gave me 4 button gnd and 4 axis when i connected my limit switch to the board the button in button config section is showing green…
-
hello terje i build firmware via STM32 bluepill web builder, i have connected EStop or Reset, Cycle Start, and Feed Hold to ground but grbl firmware can't be run on openbuilds, ugs, and io sender, las…
-
![NO-GND](https://github.com/STM32-base/STM32-base/assets/8660811/837b1c99-4ac4-48f0-af6b-63df064d610d)
https://stm32-base.org/assets/pdf/boards/original-schematic-STM32F103C8T6-Blue_Pill.pdf
…
-
I try to use the ISD17260 with your library ISD1700.h on a BluePill/STM32F103: it seems it doesn't work. I previously use it on an ATMega2560 board and it worked correctly. Did you test this library …