-
Everytime bmp280 run for the first time after reset the board it is reporting incorrect value.
Near to the sea level it should return near to 1013 hPa, but:
```
nsh> bmp280 …
-
## Bug report
**Issue details**
Plane with FC Omnibus F4 upgraded from Arduplane 4.4.4 to 4.5.3.
Beside onboard SPI BMP280 baro I have external I2C baro also BMP280.
With previous versions inc…
-
**Describe the problem you have/What new integration you would like**
BMP280 sensor supports I2C as well as SPI but ESPHome currently supports only I2C for it. It would be great if SPI support …
-
Raspberry Pi Pico connected via USB and opened in Thonny. Files were unchanged and copied to the Pico.
1: with line 4 in I2C example (from README.md) being
from bmp280 import BMP280I2C
follow…
-
### What happened?
Good morning,
I have a problem with reporting information from the BME280 sensor or I only have the temperature and pressure reported in Home Assistant. Except I have the temper…
-
### Platform
NRF52, ESP32
### Description
Can the AHT20+BMP280 sensor be added to support. Currently just the humidity is NOT shown. Everything else seems to work.
https://www.aliexpress.com/ite…
-
There is the build problem that I must add the following libraries to lib_deps:
https://github.com/adafruit/Adafruit_BusIO
https://github.com/adafruit/Adafruit_Sensor
However, the Adafrui…
-
Hi there,
and thanks a lot for your effort!
As I flashed the newest firmware onto my TTGO with 1262 ( and Stratux setup V. 29), I noticed, that the BMP280 isn't working as with the SoftRF or OGN T…
-
Der Upgrade von BME280 von BMP280 wird vom System nicht erkannt. Seither keine Messwerte mehr von Tem., Hum., Pres.
(Habe mal irendwo eine e-mail Adresse gesehen, an die man den Sensor-Umbau melden…
-
Hi. I've wrote some code to get measures from bme280 sensor but one moment it only display values :
Temperature : 21.74 (when in my room is ~28)
Pressure : 68813.25 (something terrible...)
Humidit…