-
### What happened?
The embedded Raspberry Pi Imager doesn't read IMAGER_REPO_URL in bootloader EEPROM.
Imager look for [rmem0](https://github.com/raspberrypi/rpi-imager/blob/686ad14308639b0589a297…
-
I try to run the provided image on Raspberry Pi Zero 2 W (
Downloading the image several times, writing it to different sd card always leads to the same problem: the Raspberry doesn't boot up. It han…
-
Hi there. I tried to install crankshaft on raspberry pi5. However when I try to boot I get this error
“The installed operating system (OS) does not indicate support for Raspberry Pi 5
Update the OS…
-
### Describe the bug
On my Raspberry Pi 4, upgrading from `6.1.63-stable_20231123` to `6.6.31-stable_20240529` causes a reset after 20-40s of uptime.
This is not a software-initiated reboot, as th…
-
### Describe the issue you are experiencing
I have a Raspberry Pi 3B and a 3B+
Using both Raspberry Pi Imager and Balena Etcher:
The 3B can boot HAOS, Octoprint, Pi OS
The 3B+ can boot Pi OS…
-
### What happened?
Using the Windows version to instantiate a Raspberry Pi 5 micro-SD card yielded an unbootable SD card. We tried a different micro-SD card but got the same result. We retried three…
-
I am trying to create a kernel_rt image for a Raspberry Pi Zero W
After following the steps in this repo to create the image I am using the official Raspberry Pi Imager (v1.8.5) to write the microS…
-
[https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#boot-diagnostics-on-the-raspberry-pi-4](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#boot-diagnostics-on…
-
# Enhancement
This is kind of a regression since I've been depending on behaviour that was recently removed.
Basically I want the behaviour of `fs_label` back. When configuring custom raspberry …
-
I had few problems with my HyperPixel 4 Square on my raspberry pi zero 2 W so here is the instructions to get it works :
- You will need to solder a header to plug it in to the screen
- Install …