-
Manufacturer: Supermicro
Product Name: X7SPA-H
SATA 128G硬盘启动
请填写以下信息.
Please fill in the following information.
Install ENV: (You can find it in the boot interface.)
* DMI: [dmi.txt…
-
Greetings,
I'm planing to install windows 11 on my (soon to have) raspberry pi 5, the sad thing is, I dont have an adaptor or NVME SSD to load the OS on and would use a micro SD card.
Do I need …
-
I followed the guide successfully until last step. However, when I attempt re-locking the bootloader there is the following error message:
% fastboot flashing lock
FAILED (remote: 'invalid andro…
-
# 📖 Abstract:
- ✅ Android 获取 Root 权限, 以及解锁 BL(Bootloader) 刷机
# 💯 Related:
- ✅ #429
- ✅ #350
- ✅ #222
- ✅ xxx
-
Hey! I stumbled across your repo and managed to build XNU successfully however I have issues booting it. I have a little bit of experience with ARM64 and managed to patch [limine](https://github.com/l…
-
Hi, I'm trying to write my own tool to work with UV-K5, and I stuck with a lack of information about bootloader protocol messages.
I found in source code of this project some info about packet 0x05…
qrp73 updated
1 month ago
-
Hi @bjoernQ
I am curious where you acquired this `bootloader.bin`, and if it was possible to include instructions to build it? I would like to build a bootloader to support OTA updates for the no-…
-
Hello,
I have attempted to flash the T3S3 LilyGo LoRa board with a custom program, and while it says it has successfully flashed, when I open serial the board is stuck in:
```
SPIWP:0xee
mode:…
-
# GRUB Bootloader Themes
Having Fun with Technology
[https://christitus.com/bootloader-themes/](https://christitus.com/bootloader-themes/)
-
I burned the bootloader into a "pro mini" ( atmega328p runs at 3.3v with 8MHz crystal) with the following build configuration:
` make MCU=atmega328p F_CPU=8000000L AUTOBAUD=0 SWIO=1 RX=AtmelPC3 TX=At…