-
Please add support for BL602/BL604 made by BouffaloLab
> The BL602 is a general purpose microcontroller based on the “SiFive E24 Core” RISC-V processor.
Notice that it's only _based on_ the SiFi…
-
The cmakefiles refer to a file named `class/cdc/usbh_cdc_ecm.c`
https://github.com/bouffalolab/bouffalo_sdk/blob/0f07c3b8ecbed6b5eda90cc794611c6dd9077851/components/usb/cherryusb/CMakeLists.txt#L59…
-
It looks like this board support cannot be installed on Apple Silicon.
Fails with error:
```
Downloading packages
Failed to install platform: 'bouffalolab:bouffalolab:1.0.5'.
Error: 13 INTERN…
-
Pending release of blobs or documentation from bouffalo.
See https://github.com/bouffalolab/bl_mcu_sdk/issues/85
-
Hello, bl602-pac contributors:
Bouffalo Lab (bl602 chip vendor) wants to provide an official Rust PAC support project `bl-pac` to include PAC projects for all BL chips. Since there are bl602-pac pr…
-
I requested an [ETA](https://github.com/bouffalolab/bl_mcu_sdk/issues/85) for the refactoring of the SDK and did not receive a clear and concise answer ... rather a cryptic response that implies that …
-
### Related area
Run complex (hub/multidevice) setups connected to the BL616 host
### Hardware specification
BouffaloLabs BL616
### Is your feature request related to a problem?
I recently stum…
-
**Describe the problem you have/What new integration you would like**
The classic MagicHome LED controllers just switched from ESP8266 to an SoC called BL602, apparently based on RISC-V. I acci…
-
There is no `bflb_mcu_tool.exe` in `tools/bflb_flash_tool` directory
-
Hi,
My goal here is to use edge impulse FOMO and get the count of objects on Wio Terminal. In order to do that, I was following this [link ](https://docs.edgeimpulse.com/docs/development-platforms/of…