-
**Is your feature request related to a problem? Please describe.**
The CX100 is a USB Wifi module for AC climate systems.
Originally it can be used through the MyBuderus application on the phone a…
-
Hello
I'm making my simple wiring with an ESP32 and logic level converter only for communication with the Buderus,
I've tried your ESPHOME and diwanni's firmware (https://github.com/dewenni/ESP_B…
-
Hey guys,
since 2024.6 is out now I wanted to give it a shot and update my module.
So I went and adopted the config to:
```
ota:
- platform: esphome
password: "some-ota-pw"
```
Howe…
-
After cutting the power to the Buderus the board won't come on without a push of the reset button. Is this intended?
Where is the status of the LEDs documented? The 2nd is orange, 3rd is blinking g…
-
HI,
I have a Buderus KM100, as I understand Nefit would be the protocol that should work but what ever I try I can't seem to looking. I tried Variations for logging in.
I tried like this
"ac…
-
Hallo.
Ich habe mir das Board bestellt über den Link hier, bekomme es aber nicht zum Laufen. Muss ich das Board noch flashen oder ist das bereits ready to use? Wenn ich die Reset-Taste zweimal in dre…
-
Hello,
Is it possible to add support for these devices?
The connection magic key issue with xmpp is solved by robertklep here https://github.com/robertklep/bosch-xmpp/issues/4.
-
Since release ESPhome release 2022.12.0, adding DEVICE_CLASS to number inputs is possible.
See: [esphome#4042](https://github.com/esphome/esphome/pull/4042)
But since we would force users to upg…
-
Buderus GB182i.2-20
BC400 V3.07.43
Boost works correctly from 1-4 hours, from 5 hours it is only active for 45 minutes. It seems as if calculations are being carried out in minutes with an 8-bi…
-
Hello Delchrys.
Is there some way to contact you? i have some question regarding ur buderus EMS arduino work.
Kind regards.