-
# Read the GPS NMEA string that contains GPS data it arrives from the GPS module
Use arduino string parsing routines and this guide (there are other guides) to extract the data.
https://w3.cs.jm…
-
Add your issue description here.
*If possible, upload an example that shows your problem.*
I now have some GPS data for the bus, which contains the route number, latitude and longitude of the bus.…
-
Extract GPS NMEA data and display it
Extract if available, maidenhead grid square location (on CI-V bus?), else calculate it from NMEA data.
-
If I understand correctly, the WiCAN device announced as a crowd-funded project, needs power from the CAN bus in order to operate, right? So how can it maintain communication with Home Assistant whe…
-
Use the I2C driver to create functions for the NEO-M9N GPS Module
-
### Feature Request
With the introduction of ReadEfs in PR #202, more EFS data is retained for sector coupling studies. The issue is, if many sectors are using the EFS data and try to process it at…
-
### Describe the bug
This board runs without issues with `stable`, somewhere in-between caused the following to malfunction:
- Compass is not correctly detected, it receives data and it's possible…
-
### Describe the bug
Undefined reference happens during building SITL target
```
$ make TARGET=SITL
make -j ./obj/betaflight_4.6.0_SITL.hex
make[1]: Entering directory '/home/kokokoshka/repos/b…
-
I'm having an issue with permissions between my XTRX and gpsd to try and read GPS data. No matter how I format permissions, I end up with the error...
```
sudo gpsd -D 5 -N -n /dev/ttyXTRX0
gpsd:…
-
This application is quite good. Im wrapping your ldparser to get some variables of interest. As you have mentioned in previous issues, you dont need a temporal reference to synchronize the data, but j…