-
Hello,
after the display now works with my D1 Mini (I use the "Default Pulse WEB Image" I tried the serial
Connection to my Cajooe Geiger Counter v1.1. to build.
The Geiger counter clicks (soun…
-
Just got a cajoe esp32-gc board and the image v0.6.1 is not working in PCNT. However NO_PCNT is working.
Since I never used espgeiger before I don't know if it worked in releases before 0.6.1
-
Hello,
i wired my ESP as follows and then installed the current firmware "Pulse" ESPGeiger v0.6.2 via Chrome, with the check mark next to "I have a SD1306 OLED screen connected". I then entered the W…
-
It would be great if there is a possibility to set up the GPIO pin(s) for input impulses and for output impulses (testing mode) in teh web UI interface.
-
## Overview
On the last merge of CAJOE branch, I had the next compiling error for non ESP32 boards. Compiling for Wio Terminal sounds like the #ifdef statment not works fine. Please review that.
…
-
I am trying to setup CAJOE IOT-GM-v1.1 counter.
Pulses from counter are connected to the ESP32 GPIO26.
My setup:
platformio.ini: `default_envs = esp32oled_pulse`
counter.h: `#define GEIGER_RXPIN…
-
### The problem
when compiling the code for the weather station, a problem popped up that I can't solve.
Problem is "hal" files:
`Compiling .pioenvs/weather-station/FrameworkArduino/esp32-hal-cpu…
-
Hello
I followed the steps described in this project but it does not calculate my radiation value.
Can you adapt this project for my setup?:
- Tasmota on nodemcu esp32 hw-463
- counter pulse on …
-
thanks for sharing the specs, i've setup the counter and was able to measure with it
I was wondering if you have an idea how I could disable the speaker of the RadiationD-v1.1-CAJOE board?
-
https://github.com/SensorsIot/Geiger-Counter-RadiationD-v1.1-CAJOE-
since these are both very similar projects, I'm coming from that project board is also not supported?
```
Using 'COM8' as ser…