-
Right now, the charging port is modelled assuming the car has a unique port. However, there might be cases where multiple ports exist. Hence, the following suggestion is made:
# Current
Some prope…
-
While connected to the charger, the Starlite will intermittently stop and start charging. It usually toggles from charging, to not charging, back to charging, within a second or two. This toggling hap…
-
It's veruy normal these day to enable smart charging in your home charger. In that case the home charger will not start to charge when car is connected to the charger. It will resume charging maybe so…
-
Need to investigate whether the issue in Tab, Adapter or Charging port
-
Source (Brad Schulte) : https://www.facebook.com/photo/?fbid=10161782713999749&set=g.6879225472111725
-
I have just tried out the "charging_manager" role:
The commands: `charging-start`, `charging-stop` and `charging-set-amps` work without any problems via BLE.
Unfortunately, the following commands…
-
- Model: lemp10
- BIOS version: 2023-10-13_5d997d1
- EC version: 2023-10-13_5d997d1
- OS: Pop!_OS 22.04
- Kernel: 6.8.0-76060800daily20240311-generic
When laptop is charging using the barrel co…
-
PCB
- [x] Battery compartment
- [x] Latching startup and deepsleep
- [x] ESP32 / ESP8266
- [x] 12 LEDS
- [x] Switch at the bottom
- [ ] Lipo Charge possibility
- [ ] Charging port
- [ ] Moun…
-
I bought a Royal Kluge F68 to use with my v5. Plugged it in, and the indicator light that says glows red when connected to my computer, flickered off/on while plugged into the v5.
After a few resta…
-
Many rc radios does not support charging from pd type c port. PD does not provide 5v at any time, it waits for pull-down resistors on CC1 and CC2 pins. Please add basic pd support to Hardware Requirem…