-
TLDR; setting the battery_charge_rate to zero to prevent charging requires Eco to be turned off to function correctly.
It would appear that setting the givtcp_..._battery_charge_rate to zero no lon…
-
Hello -
Attached is a system export of two F3800's (with two attached BP3800 expansion batteries) connected to an Anker Home Power Panel in the USA. I ran several exports with the API tools (with…
-
### Describe the bug
bei connect & disconnect kommt folgender fehler:
`[push ] ERROR 2024/07/04 09:19:24 invalid message template for connect: wanted: [vehicleTitle], got:.... siehe unten`
kann…
-
```
SMSC should be flexible to integrate with charging system via Diameter protocol
```
Original issue reported on code.google.com by `amit.bha...@gmail.com` on 6 Aug 2012 at 3:02
-
In my opinion, when **Instruction** is **Bulk**, but the **I=0A**, then the status should be "**Idle**" (or something like that)
![image](https://github.com/Sleeper85/esphome-jk-bms-can/assets/1561…
-
```
SMSC should be flexible to integrate with charging system via Diameter protocol
```
Original issue reported on code.google.com by `amit.bha...@gmail.com` on 6 Aug 2012 at 3:02
-
```
SMSC should be flexible to integrate with charging system via Diameter protocol
```
Original issue reported on code.google.com by `amit.bha...@gmail.com` on 6 Aug 2012 at 3:02
-
```
SMSC should be flexible to integrate with charging system via Diameter protocol
```
Original issue reported on code.google.com by `amit.bha...@gmail.com` on 6 Aug 2012 at 3:02
-
```
SMSC should be flexible to integrate with charging system via Diameter protocol
```
Original issue reported on code.google.com by `amit.bha...@gmail.com` on 6 Aug 2012 at 3:02
-
```
SMSC should be flexible to integrate with charging system via Diameter protocol
```
Original issue reported on code.google.com by `amit.bha...@gmail.com` on 6 Aug 2012 at 3:02