-
I've had the Pico SDK installed on my RPi5 since about Jan or Feb this year (2024). To avoid the `BOOTSEL` procedure (which requires 3 hands :), I bought a "Raspberry Pi Debug Probe", and installed `o…
-
I have built it from sources for M0S Dock and the device is not stable. Sometime it freezes during communication but typically it cannot be detached from device and hangs when closing the connection.
…
-
**Describe the bug**
When Jlink is configured to be in CMSIS-DAP mode, probe-rs could not use it in both Jlink and CMSIS-DAP mode.
**To Reproduce**
1. Set a Jlink probe to be in CMSIS-DAP v2 mode…
-
First up, I realise that this is not "required" as you can always use `orbuculum` to capture the SWO data, and `orbtrace` to configure the dongle, and https://github.com/orbcode/orbuculum/blob/main/Su…
karlp updated
3 weeks ago
-
### Development Kit
Custom
### Module or chip used
ESP32-WROVER-E
### Debug Adapter
nanoDAP-HS
### OpenOCD version
v0.12.0-esp32-20240318
### Operating System
ArchLinux
### Using an IDE ?
v…
-
https://www.ruanx.net/diy-daplink/
讨论各种 CMSIS-DAP 协议的调试器,然后 DIY 一个 DAPLink。
-
Seems that the DAPLink interface is not stable on my Muselab NanoESP32 S2 evalboard even if I set the adapter speed down to 1kHz, openocd log:
```
Info : Listening on port 6666 for tcl connections
…
-
New YAPicoprobe ( Pico) out of the box, fresh connectors and the latest release bin ( [yapicoprobe-0120-pico-f726bca.uf2](https://github.com/rgrr/yapicoprobe/releases/download/v1.20/yapicoprobe-0120-p…
-
I am trying to use a Pico with yapicoprobe to upload and debig another Pico.
Using VS Code, Platformio, with platform = raspberrypi and framework = arduino.
`debug_tool = cmsis-dap
upload_protocol …
-
At least on windows (I did not test other OSs yet), the rusty-probe enumerates as two devices with the same serial number.
For this reason, `probe-rs` requires additional parameters `--probe 1209:485…