-
_This is a meta ticket, providing a general description for the specific subtasks_
Imagine a process chain were raw materials are produced. These raw materials could be used in a production process…
-
### Feature/improvement
Hi @Sitespeed,
to get more specific CO2 numbers /measurements, I would raise the idea to add a possibility to add a country code from https://app.electricitymaps.com/zone/D…
-
Working list of things to fix / adjustments:
- [ ] Check code to see if ungrouping data frames allows for noticeable speed up in performance.
- [ ] If monthly mean is an NA, then the resulting fla…
-
Obviously, the user should have their measurements on the same scale!
@eray-noaa: Is it
- WMO **X2019** for CO2
- WMO **X2004A** for CH4
- WMO **X2014** for SF6?
@anengel60: is it WMO **X2014*…
-
In low power mode, the reported temperature was about 2 degrees too low.
I tried setting `temperature_offset` to `2`, but it was still too low by ~.5 degrees, so I set it to `2.5`. As a consequence…
-
## Description
When running the example https://github.com/ibpsa/project1-boptest/blob/master/examples/python/testcase1.py and plot the result, it gives the following plot.
 works, and which conditions need to bet met for optimal results, as I'm a bit confused. Here’s an excerpt from the spec:
…
-
Super, hab noch kleine Änderung gemacht. Alles mit * muss angegeben sein, alles andere ist zusätzlich. Du kannst Sensor-Namen mitschicken, wenn die Datenbank sie noch nicht kennt werden sie erstmal gl…
-
Add low power modes to CO2 Gadget,
Starting with SCD41 sensor (not too expensive and widely available).
Nothing too complex but with different low power modes the user can select in preferences:…
-
### Discussed in https://github.com/hgrecco/pint/discussions/1604
Originally posted by **MichaelTiemannOSC** October 10, 2022
I have spent the past year working on a tool that integrates produ…