-
### What needs to change?
We will need a library to work with the Light Tower board being developed by our electrical team (see uf-mil-electrical/NaviGator#2). This would include telling the board wh…
-
Pressing F5 (Blinky application) opens the Terminal to show the compilation process. It should then open the Debug Console window to show the communication with the board (along with any application …
-
Emergency board accessible as a short-cut through the settings. Like how on iPhone you have the ungated opportunity to make an emergency call.
-
Hi,
I was hoping for the possibility to see the following information to be returned:
- communication board version number
- control board version number
- inverter id
This information was very use…
-
I used the demo project to download to NUCLEO-F429ZI board. The RS485 communication is ok. I used PC yabe to add the board. But it
show can't get object list.
-
Hello.
Flashed esp-link latest stable ver to NodeMCU v3 with CH340 chip.
Flashed nodeMCU works in such ways:
- Web interface works;
- WiFi works;
- Terminal communication trough builtin USB por…
-
I have successfully ported the Demo System to the Basys3 board (the branch in my forked repo is [here](https://github.com/lowRISC/ibex-demo-system/compare/main...medexs:ibex-demo-system:add-basys3-sup…
-
Define an Arduino library to deal with the I2C connection to the Main Board
- [ ] Identify the data that the motors can receive from the main-board [here](https://github.com/Team-Isaac-Polito/PicoL…
-
One of the several ideas of Kekbo is to allow admins to use a "Bring You Own" authentication mechanism. For example, admins may be running a message board, so there could be different authentication m…
-
Upload Firmware Error with pix4-v2