-
I was looking at the default configuration for the comparator and I noticed that the reference voltage in the comment does not match the reference voltage in the code.
```
/**
* @brief COMP dr…
-
**Is your feature request related to a problem? Please describe!**
The pitch detection PLL builtin to Treemonster could use some expansion.
**Describe the solution you'd like:**
PLLs are inherent…
-
https://www.elby-designs.com/webtek/panther/cgs762-slope-detector/cgs762-schematics.pdf
-
**Is your feature request related to a problem? Please describe.**
Trying to detect how full the buffer tank of a fluid loader is with a comparator to only send a tank cart when it's full, comparator…
-
when ELDT1C is cleared the PWM still updates, according to the datasheet and some tests it should behave as:
Clear (0): T1 Low will strictly use the value that was last written in T1 Low Compare befo…
-
your official code dont work!!!
https://github.com/espressif/esp-idf/blob/v5.3.1/examples/peripherals/mcpwm/mcpwm_sync/main/mcpwm_sync_example_main.c
/*
* SPDX-FileCopyrightText: 2022-2023 Esp…
-
I often scroll down pages and images with a trackball, but when i have horizontal scroll on the same layer then the page slides left or right. although separate layers for hscoll and vscroll are usabl…
-
I was about to reverse engineer the protocol for Atorch DLB-600W digital load, which has even mode load modes.
I see you write:
"Only the CC mode is fully supported. The protocol does not allow sele…
AndKe updated
1 month ago
-
**Is your feature request related to a problem? Please describe.**
Using `XCDiffCore` as library enables other tools and application to leverage xcdiff programatically to perform project comparison…
-
**Problem:**
When the LHN is in "focus" mode, its sorting should be:
1. All pinned reports, alphabetically
2. Everything else, alphabetically
However, it doesn't seem to be. Here's from @iwiz…