-
Hi, I'm using this library as a Modbus bridge to read registers from a Schneider energy meter (the only one which is working for me) on RS485 serial port and I have a little issue... Most of the regis…
-
Hi.
**Can you add Controllino boards?**
At my workplace, we use Controllino boards to test some of our products.
It is an industrialized version of Arduino's platform. For example, the **Controllin…
-
Hi gang and Marco!
I tried to use aRest with a Controllino Maxi device (https://controllino.biz/) without luck.
Controllino devices are based on the Arduino Mega 2560 but it seems the IO port mapp…
-
Hi!
I have a Controllino Mega, and im trying to enter configuration menu to set and store my own parameters after sucessfully sketch upload, but when I short RXD2 to ground, i receive "invalid sign…
-
What kind of issue is this?
- [X] **PlatformIO Core**.
If you’ve found a bug, please provide an information below.
------------------------------------------------------------------
##…
-
Controllino MEGA. IDE 1.8.10
Just setting up the Controllino to sync the RTC with a NTP source. Downloaded a simple NTP example sketch and the system reported the correct time. Integrated it wit…
-
Hi,
thanks for sharing the library. However, I get error trying to compile the example.
```
Arduino: 1.6.12 (Mac OS X), Board: "Arduino/Genuino Mega or Mega 2560, ATmega2560 (Mega 2560)"
In fi…
-
Hello everybody, I have 2 question:
The first, most important: How can I debug a Controllino? I couldn't find any information on the datasheet and user manual...
The second: is Controllino compatibl…
-
Hi,
I did first a upload of the bootloader of Ariadne on a Atmega2560 (in fact, a controllino Mega). I did some modifications in spi.h, spi.c for pinout on the eth et rtc (instead of sd).
(I uplo…
-
Hello,
there is know W5100 erratum which causes that socket.cpp -> EthernetClass::socketSendUDP() never returns. It happens during asynchronous bi-directional UDP communication when one packet is b…