-
I am trying to setup the sx_1303 LoraWAN gateway as given in the official documentation. I have created my TTN account and trying to execute chip_id file but am getting following error:
CoreCell …
-
I'm unable to start a SX130X as concentrator under kernel 6.6.22 on a Pi 4B.
Running reset_lgw.sh, outputs:
`./reset_lgw.sh: 26: echo: echo: I/O error
./reset_lgw.sh: 27: echo: echo: I/O error
./r…
-
Hallo!
It is a gear help this HAL for starting with SX1302.
But for rapid starting it will be better for update the LoRa Core Reference Design.
A great help will be, if some more information about …
-
I'm experiencing an issue where the Gateway ID assigned by ChirpStack Concentratord doesn't match the EUI of my RAK7391 device. I'd like to manually set the Gateway ID to match the EUI of my RAK7391 d…
-
we can detect the chip being sx1303 or sx1302, can be useful for some things in the future i guess
sx1302...
```
root@64709de465a7:/opt/iotloragateway/packet_forwarder# /opt/iotloragateway/packet…
-
## Summary
We have been working with separate SX1302 binaries and chirpstack server for last a few months, it works well.
But is there any way to integrate IN865 in SX1302 chipset configuration fo…
-
I cannot figure out which pins to set for the reset script.
spi and i2c are enabled.
tyro@rpiz:~/LR1302_loraWAN/LR1302_HAL/sx1302_hal/packet_forwarder $ ./reset_lgw.sh start
CoreCell reset thro…
-
Hi ,
Recently I got a sx1302 module with raspberry transfer board , I try to execute with compiling the open source sx1302_hal codes .I tried to test with test_loragw_reg , the result as follow …
-
Hello,
Semtech basicstation can be configured using some kind of platform and for each platform (linux,corecell,linuxpico...) some kind of variants (**std,stdn, ...**).
For example variant stdn enab…
-
After resolving the commas issue, that is the result :
pi@RK01:~/sx1302_hal/bin $ ./lora_pkt_fwd
*** Packet Forwarder ***
Version: 1.0.5
*** SX1302 HAL library version info ***
Version: 1.0.5;
…