-
### Cura Version
5.9.0
### Operating System
Windows 10
### Printer
Creality Cr6 Max
### Reproduction steps
Open Cura slicer with the recent update.
Enable the "Scarf Seam" feature.
Print a mo…
-
### Description
Unable to correctly flash firmware V6.1
### Steps to Reproduce
See attached file "Issue - installing Community FW V6.1.pdf"
### Additional Information
CR-6 SE. Motherboa…
-
### What happened?
I'm using setting "Avoid crossing perimeter" with "Max detour length" set to 0 (zero) - this should disable the detour length consideration and simply avoid crossing the perimeter …
-
### Did you test the latest `extui` code or prerelease?
Yes, and the problem still exists.
### Bug Description
Reproduction steps:
**Running CR6-SE 6.1 on BTT board , with neopixel attache…
-
* [ ] 1. Design a slim workflow definition schema similar to FabFed but more compact
* [ ] 2. Develop client methods for managing "instance group" (similar to FabFed workflow session)
* [ ] 3. Expe…
-
### Is your feature request related to a problem? Please describe.
I have a direct drive extruder and I need to reduce the X-Axis down to 375mm and Y-Axis down to 365mm. The ability to change these v…
-
### What happened?
Infill of small areas leads to excessive over extrusion without any clear option to fix it without affecting larger infill areas negatively.
Options exists to reduce general "…
-
just a quick note...
i recently got a new CR-6 Max wit the era board.
i have a pi running with a touch screen and the basic klipper / moonraker / mainsail / klipperscreen loaded and seems to wor…
-
Determine a good default set for movement kinematics.
Think of things like:
- Linear advance enabled/disabled (vs S curve acceleration)
- S curve acceleration
- Classic jerk vs junction deviati…
-
### Ping github.com
```markdown
PING github.com (140.82.121.4) 56(84) bytes of data.
64 bytes from lb-140-82-121-4-fra.github.com (140.82.121.4): icmp_seq=1 ttl=41 time=145 ms
64 bytes from lb-140-…