-
Hi fellas,
I'm currently using SAM9x60 Curiosity board with DLP-7970ABP - TRF7970A NFC transceiver BoosterPack™ plug-in module.
I've enabled the driver for trf7970a as loadable module in buildro…
-
I'm getting error:
`avrdude error: address 0x820009 out of range at line 665 of .pio\build\test_fuses_in_elf\firmware.hex`
caused by having C source file containing FUSES setting (src/fuses.c):
…
-
I mentioned in #659 that I performed extrinsic calibration in a narrow and long rectangular area. I copied some lines related to rmse from calibration.log. Please forgive me that these lines may not b…
-
Hello. I’m very excited about the big V2 update and have managed to fine-tune your model on 5 hours of my high-quality data. However, I have a few questions:
1. I was using the Colab version here: …
-
Avrdude ~7.0~ ~7.1~ ~7.2~ ~7.3~ 8.0 is a huge improvement over 6.3 and brings lots of new features and bug fixes. Arduino now provides "flavored builds" with statically linked libraries, so boards lik…
-
Built and Program are all OK, while there was nothing in Data Visualizer. I used PIC18F57Q43 Curiosity Nano board.
snapshot: https://ibb.co/rc3Znsd
circuit photo: https://ibb.co/d7zckcH
-
In the Legato QuickStart guide for the PIC32 MZ DA Curiosity with AC320005-4 (https://github.com/mchpgfx/legato.docs/wiki/QuickStart-PIC32MZ-DA-Curiosity-Development-Kit) the portion where it describe…
-
I'm a newbie with grblHAL, so apologies if I missed something in the documentation I should've seen.
I set up a new environment for the SKR 2 with TMC2209s as follows:
```
[env:btt_skr_2_tmc2209]…
-
- [ ] 8051
- [ ] C8051F330: Silicon Labs ToolStick
- [x] AVR
- [x] ATtiny85: Adafruit Trinket
- [x] ATtiny13A: Cheepit Sparrow
- [x] ATmega328P: on breadboard
- [x] Cortex-M
- [x] S…
-
Hi, I just noticed that flashing fails with this error
```
C:\Program Files (x86)\Atmel\Studio\7.0\atbackend\atprogram.exe -t nedbg -i SWD -d atsame51j20a program -f /tmp/arduino_build_154511/pidtes…