-
**T-SIM7670E - ver 1.2**
I want to put the ESP32 to sleep for 600 seconds. Additionally, while the ESP is sleeping, I want to be able to wake it up using GPIO39 or GPIO36 because they are not conne…
-
Hello,
for some reason I can't manage to reach deepsleep with low energy consumption.
I already tried to write a shutdown method to Power Down the modem before going to sleep.
Any hints to accom…
-
Hello,
I would like to use a BME680 sensor with BSEC2 library in a ESP32-S3 with battery.
Can you provide the constraints on using it together with deepsleep?
BSEC library is quite picky in terms o…
maxdd updated
1 month ago
-
### Port, board and/or hardware
esp32 port, waveshare ESP32-S2-Pico
### MicroPython version
MicroPython v1.23.0 on 2024-06-02; Generic ESP32S2 module with ESP32S2
### Reproduction
import os,time,…
-
### Port, board and/or hardware
Pico 2 / RP2350
### MicroPython version
MicroPython v1.24.0-preview.201.g269a0e0e1 on 2024-08-09; Raspberry Pi Pico2 with RP2350
### Reproduction
1. Install latest…
-
```
Which device are you on? (Ace,Fit, Gio or Mini)
Ace
Deepsleep doesnt seem to work, havent changed anything from flashing, rebooted
a few times and left the phone alone for 10 minutes still no …
-
Thanks for sharing.
As I can see in line 51, you're making a delay() rather than using LowPower.sleep().
Did you also have difficulties in waking up the module after deep sleep?
-
Add support for the deep sleep mode the reduce power consumption.
-
Somehow i got the impression that lightsleep and deepsleep were not working on the RP2 devices. Fortunately ghubcoder posted about PR8832, which prompted me to try using lightsleep.
Perhaps the Qu…
-
Dear fellows,
I have the T-SIMCAM OV2640 and the SIM7600G-H, which has the TP4056 battery charger, this charger only has a blue LED, I've seen other TP4056 that has a green and red a LED to know if…