-
Rattlegram could be extremely useful in helping remove barriers to entry for GMRS data transmissions. Data transmissions over GMRS are now permitted per FCC, but with strict requirements.
However, …
-
There is currently no audio support planned until reverse engineering and interfacing with the digital bus is fully working. Creating this Issue as a placeholder for possible future work and to inform…
-
Let's use this issue to coordinate the statistics / math notebooks as part of the fundamentals. We can move these out to a separate repo later if that makes more sense organization-wise.
Below are …
-
Sometimes the WNIC is tested as a 4 mark question, would be helpful to extend some points here...
• Provide interface to wireless network
• … as an antenna
• Receives analogue radio waves
• … …
-
# Overview
## Explain the topic in 2 sentences
Dataspace consumers should be able to send feedback about consumed data to the respective data provider, via a proper back channel. This back channel…
-
Currently rattlegram is functioning in a "multicast" mode, in which it is transmitting messages to anyone listening, decoding, and displaying messages from any transmission. A more ideal solution woul…
-
# Overview
## Explain the topic in 2 sentences
Currently, data transfer, even for big data goes through the connector data plane. For transmissions between two S3 Buckets, this is not efficient and …
-
Greetings all! In the configuration file examples, I see the squelch setting in the [Sources] section, but in the explanations of the various settings for the configuration file, I see the squelch in…
-
```
What steps will reproduce the problem?
1. Receiving a 64-bit addressed I/O sample from a Series 1 XBee,
configured with digital channels 0-2 set to digital in, channel 2 set to
analog in, and ch…
-
```
What steps will reproduce the problem?
1. Receiving a 64-bit addressed I/O sample from a Series 1 XBee,
configured with digital channels 0-2 set to digital in, channel 2 set to
analog in, and ch…