-
It would be good to be able to select the audio input and output rather than always going to default -- I sometimes run multiple audio interfaces. (Include Pulse Audio)
I would like to see Latitude…
-
SimpleFLE does only support a very limited set of modes. E.g. DIGITALVOICE is not supported.
https://github.com/wavelog/wavelog/blob/f3a8dd68d42e2ec02294afae6230acb73eded460/assets/js/sections/simp…
DC1TC updated
5 months ago
-
A request was submitted via the digitalvoice mailing list to provide an option to enter frequencies in KHz instead of MHz (i.e. "14236" instead of "14.236"). This issue was created so that this reques…
tmiw updated
11 months ago
-
Previously discussed on the digitalvoice list; creating here to keep it from getting lost. Selected frequencies should be usable by US General class licensees (the original reason for the request).
…
-
**Describe the bug**
Table adif_modes contains lots of duplicate modes
**To Reproduce**
Add QSO, open dropdown for mode, see lots of duplicates
**Expected behaviour**
fewer modes with distinc…
-
Reported on the digitalvoice list today (and duplicated by myself on Windows 11). From initial research, it seems that digitally signing the installers should at least make it happen less often.
Un…
-
Per digitalvoice list:
> Thanks for all your work bur unfortunately the scatter plot is not visible on my windows10 box.
> Another interesting thing I noticed is that if the waterfall display is…
-
Per the digitalvoice list, apparently the FT-991A will offset the frequency a bit when using FreeDV as the mode gets changed after the frequency. Swapping the order of operations will supposedly fix t…
-
Per feedback from the digitalvoice list, there should be some sort of way to filter listings in FreeDV Reporter (ideally both in-app and on the website) by band/frequency to make it easier to find con…
-
By request from the digitalvoice list, there should be something in the options to revert to the pre-1.8.10 behavior for Hamlib (as in, frequency and mode are read only and only PTT is touched).