-
The camera i used is DFM 37UX178-ML, and i installed IC Imaging Control 4 SDK, GentTL Producers and IC Capture, when i used IC Capture , it can find the correct device and adjust the corresponding cam…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Board
ESP32 38 pines NODE MCU
### Device Description
I'm developing a project of telemetry using esp-32. I put the codes with the libraries and when i pressed the "ESP-IDF: Build `Project" loo…
-
Dear foxBMS/foxBMS-2 Team,
While going through the source code and drivers, I couldn't find drivers for PHY IC DP83869. I got the drivers generated by HALCoGen for DP83640. Is there any other file …
-
Does anybody sucessfull make control led matrix 64x32 with mbi5153 (icn2053) led driver ic
New matrix P5 64x32 comes with new IC led driver (Same as P2.5 matrix)
P5 Matrix with mbi5038 (icn2038) i…
-
FAILED: utils/general_utils/CMakeFiles/gen_utils.dir/http_utils.cpp.obj
"C:\Program Files\Microsoft Visual Studio\2022\Professional\Common7\IDE\CommonExtensions\Microsoft\CMake\CMake\bin\cmake.e…
-
Good morning Antirez,
I have been trying to get your code to work with another driver (the UC8179 instead of the UC8151) It’s a similar chip but slightley different because my display has a higher …
-
## Introduction
The MCP9600 IC has some advanced functionality, such as an internal digital filter, a burst mode etc., that is currently inaccessible from the drivers. My proposal is to enable acce…
naNEQ updated
4 months ago
-
Hey I am trying to follow the installation guide to install nerfstudio on windows 11: https://docs.nerf.studio/quickstart/installation.html. Whenever I get to the installation of tinycuda I get this e…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…