-
### The problem
* after update to ESPHome 2024.6.1 my ds18s20 devices are sending wrong values
* discovery doesn't work anymore, got log: `[W][gpio.one_wire:078]: Found no devices!`
* found th…
-
**Is the DS18S20+PAR a direct replacement for DS18S20?**
**BACKGROUND**
Others have noted and I too appreciate the excellent documentation available to upgrade this oven. I have a time-critical an…
-
The junction temperature is being reported as 10C after installing the DS18S20. I did not see the DS18B20 at Digikey. I installed this:
https://www.digikey.com/product-detail/en/maxim-integrated/DS…
-
Hello, is it possible to write a plugin which supports an DS9097U based USB 1-Wire adapter?
With digitemp_DS9097U / rrdtool etc. it works, but I like to include my one-wire temperature sensors (DS18S2…
-
I get the error 'unknown type name 'TSDS18x20'.
The error points to uint8_t OWReset(TSDS18x20 *pDS18x20) in the ds18s20.c file.
Any tips?
I am working in Atmel Studio 7
-
Hello,
There is an issue with DS1920 on the ESP8266.
When wired like:
http://www.vr-online.ru/sites/default/files/blog/2015/03/sized_3_ibutton_arduino_jpg_12791.JPG
The basic example code works …
-
Nur Angabe der 1Wire Adresse, da Familie und Typ ja aus der Adresse abgeleitet wird. Auch die Angabe "porperty" ist nicht nötig. Zur Zeit braucht "family", "property" auch nicht stimmen, da diese Anga…
Ekkib updated
9 years ago
-
Есть ли в планах добавление дополнительных реле с полным функционалом, таймеры, сценарии
Было бы удобно назначать определенному GPIO функцию управление реле.
Использую прошивку на wemos d1 r2 для …
-
`The DS18X20 B7 chip die (found in the DS18B20, DS1820S, and DS1822 products) can experience EEPROM data corruption failures during power on reset.`
`Since the EEPROM holds internal trim values (in…
-
When a sensor is reporting -55°C, the library treats the sensor as disconnected and reports temperature readings as -127°C.
The issue appears to lie with the library since it defines the followin…