-
Hi.
May be I wrong but I guess you mixed something in examples/DustSensorDSM/DustSensorDSM.ino
>ratio = (lowpulseoccupancy-endtime+starttime)/(sampletime_ms*10.0); // Integer percentage 0=>100
…
-
## Is your feature request related to a problem? Please describe.
My Q5 always states "Dust bin installed", or "Dust bin removed" whenever the bin is removed for cleaning/reinstalled. Is there a way …
-
Até agora o maior problema vem sendo o sensor de poeira.
Os resultados continuam congelados com o output:
PM10count: 0.62
PM25count: 0.00
concLarge: 0.20
concSmall: 0.00
Ainda: resistores de 1…
-
Dust sensor code library currently doesn't read data from sensor.. unsure if it's not structured properly or not actually transmitting the parameters to configure the sensor.. Needs analysys
-
Hi,
I build that dust sensor according to these instructions: https://sensor.community/en/sensors/airrohr/
In the instructions it is shown that the dust sensor and the ESP8266 should stick out from…
-
**Describe the bug**
If powered through a very short pulse, dispensers will not dispense. However, if powered through other means at the same time, it will work normally (see gif).
**Expected beha…
-
**Describe the bug**
The entity sensor.x40_ultra_complete_low_water_warning entity does not update when the tank is empty, while the application is fine. I'm also wondering if there is any sensor ava…
-
Please add groviepi dust sensor PPD42NS support to groviepi-exporter and also updated groviepi grafana dashboard about this sensor.
https://www.seeedstudio.com/Grove-Dust-Sensor-PPD42NS.html
-
The revspace project uses these, they're approx £20 in BoM, but incredibly useful. Would be a great way to quantify the dustiness of the CNC room, and when a mask might be required.
https://revspac…
-
Hiya
I suspect "A" is an unused input
B is a direct reading of the TVOC device Vout in mV - it goes down the more alcohol/formaldyhyde is around. Looking at the datasheets, converting this to VO…