-
We got a report from `uue` who had asked people to turn duty cycling off on their phones, and after that point stopped seeing data on the admin dashboard. After investigating, it seems that under thes…
-
Hello,
I'd like to create my own servo system. To do this, I want to control the duty cycle of the motors. However, I haven't found any method of doing this. Is there one? Or is there a way to do i…
-
I couldn't seem to get it to work properly with the GPIO test:
https://wokwi.com/projects/412403579090783233
It appears to turn the PWM either always-on or always off as expected, but if you cha…
-
Tested using kernel 6.6.31 and freshly bumped kernel 6.6.47. The fan used was the original case fan from the official Raspberry case (30x30x7mm, maker is Coolcox, model CC3007H05S. I have tested the s…
-
For some reason, with the version at https://www.falstad.com/circuit/circuitjs.html when I draw a new voltage source (both one- and two-terminal versions seem to be affected) and change it to pulse mo…
-
### Board
ESP32
### Device Description
DOIT ESP32 DEVKIT V1
#…
-
**Is your feature request related to a problem? Please describe.**
Intake VVT in Gen2 Coyote does not rest in a "fully retarded" position, but literally at the halfway point. We need logic to do forw…
-
Display backlight (gpio 42) is working on regular t-deck using LEDC PWM , but same code doesn't work with the Plus model.
How backlight can be enabled with esp-idf APIs? Should I use any specific PWM…
-
Is there anyway to read the duty cycle in addition to the frequency value ? Thanks
-
Hi,
I am using this repo for my project with the STM32F401 MCU and SX1276. I have managed to get the code working, but I am facing one issue: the application sends only one message to TTN, and noth…