-
I'm trying to make this gateway work with an EBYTE E22-900M30S module directly wired to the pins as described on the README without success. I have tested this with the 32 and 64 bit images.
RPI P…
-
### Discussed in https://github.com/meshtastic/firmware/discussions/3948
Originally posted by **NancyDeville** May 21, 2024
### SOC
ESP32
### Lora IC
Ebyte E22-900M30S / Ebyte E22-900…
-
I'm afraid to ask, but is there any source code yet?
I am working on a large project with an existing LoRa codebase, but it is not mature at all. The project would require a protocol like the one desc…
-
Could the development board ebyte E73-TBA be added to the available boards?
When selecting the generic board it works, though the uart is on the wrong pins.
https://www.ebyte.com/en/downpdf.aspx?id=…
-
I am stuck with a board from Ebyte:
https://www.cdebyte.com/products/E104-BT5010A-TB
This board uses a module based on nRF52810.
It has a UART on it, and when I try simple AT commands, it throws …
-
Hi, is there a way to support ebyte E22400M30S Modules?
1W Output and rx preamp onboard.
Kevin (DL5OP)
-
product link : https://www.ebyte.com/product-view-news.html?id=1030
buy link : https://detail.tmall.com/item.htm?id=624428606924
-
According to your Readme the Get Version command C3H C3H C3H returns a 4 byte reply. According to the E32-900T20D Users Manual page p14 section 7.3. there is an 8 byte reply.
My experience shows a 4 …
-
Hello, this is not a bug in library itself, just a warning and maybe suggestion for enhancement (adding the check or documentation). The new V2.1 modules (PCB versions 10498-V1.1 and 10497-V1.0) - an…
-
The spec doesn't allow for arbitrary number of bytes, but it could be easily modified to handle it.
In fact, there is enough information in just the `size` parameter to determine encoding and dec…