-
Hi everyone,
I just saw [PR #514](https://github.com/KiCad/kicad-symbols/pull/514) about electrical motors, and i was thinking, is there a plan for a symbol library about electrical design? With i…
-
Icons for IEC protection classes would be nice.
http://en.wikipedia.org/wiki/Appliance_classes
Class I: http://commons.wikimedia.org/wiki/Category:Earthing_symbols
Class II: http://commons.wikimedia…
-
LoadImpedancePQ and LoadPQVoltageDependence inside Electrical.Loads share the same symbols, which is inconvenient.
I propose making a change so that they are different from each other. Maybe LoadImp…
-
1. Pick an icon library to build off (ant, material, phosphor, lucide, radix)
2. Build a set of custom icons that fit within the style
3. Get a list of electrical engineering symbols and try and tur…
-
charts and test conditions
CSD19506KCS copy.pdf
[sample](https://github.com/user-attachments/files/16603489/CSD19506KCS.copy.pdf)
## Qgd - V chart
![image](https://github.com/user-attachments/…
-
Idea for a future release : a source with an inner symbol representing transient waveform. Would be of interest in schematics and drawings relative to device EMC qualification tests (indirect lightnin…
-
The following is only valid for symbols of devices that do not use the same pins for other functions.
For master devices the electrical types should be as follows:
- CLK = output
- Chip select (C…
-
Could you add symbols for architectural drawings? Smoke detectors, electrical outlets, appliances, etc?
-
```
Electrical Power Symbols
1. some symbols require text. For example the motor symbol would be a circle
with a letter in the middle.
2. the Load Tap Changer LTC requires a name to appear along s…
-
The instructions on `README.md` are incorrect for Inkscape after 0.9. Inkscape 1+ doesn't use `~/.config/inkscape/` -- adding stuff there will have no effect on anything.
On MacOS Big Sur, I was ju…