-
Hello Kris,
Sorry that I contact you this way, but the Facebook app on your Tindie account isn't working for me.
Me and another project group at my university are working on a project concerning ori…
-
Hi,
I am getting this error when launching DriverNode.py:
Traceback (most recent call last):
File "/home/ubuntu/catkin_ws/src/em7180/scripts/DriverNode.py", line 37, in
from em7180.msg im…
-
Hi,
I recently bought the board and the results are pretty amazing.
I am able to get an output data rate of 100hz by using your provided sketch but for my application i require as high a data rate p…
GM223 updated
6 years ago
-
Marvelous stuff! I have looked at all the documents I could find on pnicorp.com and emdeveloper.com,
but haven't found the source of the following information about register addresses and meanings
th…
-
Hi Kris,
I bought this EM7180 a few days back. I read in its datasheet that you don't need to calibrate magneto in it and I have uploaded your code which has pre-written function for calibration of a…
-
Anyone who has used the ESP32 along with the sensor fusion would have had some issues with I2C and im expecting that my problem is going to be something related.
Apparently since Wire 1.0.1 Wire …
-
1. ESP32 Connected to Sentral MPU9250 + BMP280 from tindie
2. I2C 0x28 found okay
3. Code using: /* EM7180_MPU9250_BMP280_t3 Basic Example Code
4. Code adjusted on the Wire commands
5. Connections…
-
hey,
where i will get EM7180 ic? also what is the frequency of crystal?
thanks
-
Hello i tried to use the Ultimate Sensor with an ESP32, but it looks like i have no SENtral device information.
```
Scanning...
I2C device found at address 0x28 !
done
EM7180 ROM Version: 0…
-