-
https://github.com/project-chip/connectedhomeip/pull/35861 introduces `DataModel::DeviceTypeEntry` which in practice is identical to `EmberAfDeviceType`.
Figure out a way to share this definition. …
-
### What happened?
Hi,
I tried to setup a new ZBDongle-E controller using zigbee2mqtt with home assistant and mosquitto today.
I have tried multiple 7.4.x firmware versions (including the most re…
-
### What happened?
When trying to reconfigure the Device I get the following error:
```
z2m: Failed to configure 'Office - TVOC', attempt 4 (Error: Bind 0x54ef441000106b9b/1 genPowerCfg from '0x84b…
-
### What happened?
**Hello my english is not the best. SRY
I suddenly after update had an issue.
My Sonoff Zigbee 3.0 does´t start with Zigbee2MQTT.
I had this issue "z2m: Error while starting z…
-
### What happened?
I changed my Dongle-E adapter to a SLZB-07. Steps in order:
- Update the firmware of the SLZB-07 with the flasher of SMLight to version 7.4.1
- Unplugged the Dongle-E an plugged…
-
### What happened?
Hi,
Apparently, the powertag A9MEM1570 is a device supporting the ZB greenpower (GP) standard. These devices cannot be paired to ZB2MQTT directly, but only through the ZB GreenPow…
-
### What happened?
I have been have stability issues recently so thought I would try and use ember and see if that improves things. I am using a SLZB-06P7 and when I switch config to ember, I receive…
-
### What happened?
Hi,
Since I'm on ember driver I have an issue. During a join process one or more previously well working battery powered devices disappering from the network, or stop working. …
-
### What happened?
I tried to update the device using z2m.
FW 131076 to FW 131077
### What did you expect to happen?
Update shall go through
### How to reproduce it (minimal and precise)
…
-
Hi,
Has anyone been able to push an SDP file to a Powercore (or any other Ember+ device I guess) from Companion so that it subscribes to a stream? The Powercore expects carriage returns for each li…