-
I assume the answer to this is "no" but I want to make sure: does changing the default connectivity pin (the 6-digit number that defaults to 000000) impact Ki2 and its ability to connect to Shimano eM…
-
Salut Bogdan,
Am cronometrat o cursa de emtb sâmbătă, iar la exportul clasamentului general am primit aceeasi eroare ca Iulia la Șugaș: 'Failed to compare two elements in the array'.
Oare mai p…
-
Hello! I used your firmware to improve engine performance, and I have a question about the firmware parameters. I mainly use assistant levels 2 and 3 on the stock engine and differentiated the levels …
-
Hey, great that you reverse engineered the Shimano bluetooth connection. I don't fully understand what you do here. Can you maybe explain more to me?
https://github.com/markdotai/emtb/blob/4667c43f…
-
Hello and thank you for the data field.
Do you think it is possible to record and store the displayed values such that they can be viewed after the activity?
Thank you
-
Per discussion with @casainho and @lowPerformer. Capturing here to do someday:
If the motor stops receiving packets from the display, we should turn off a couple of modes the display might have fo…
-
Congratulations for the firmware TSDZ2-OSF-V20.1C.3. I have installed on my bike with the TSDZ2 motor and I have found it very good. Thanks for sharing it.
But testing my bike, I have realised that t…
Oricb updated
2 years ago
-
Hello,
Thanks for the awesome work you made for us !
I have a TSDZ2 750W, a XH18 display and a 48V 10.5Ah battery.
I've successfully calibrated the torque sensor and got values very closed to t…
-
Hi @cagnulein
Is it maybe possible to make the Watt Gain Setting available and decrease/increase it via a new Tile? I would like to have this one because it would be the easiest way to simulate a …
-
Hello,
could you please add support for the garmin edge 840 solar?
best, Andreas