-
These are fan speed controls for in and out air fans. They work with my 2014 Enervent Pingvin EDE but are not included in this project and according to documentation these are not supported. For some …
-
Hello, and thank you for this awesome bridge for the Enervent.
I use a Waveshare RS485 to Ethernet serial server talking to my Enervent Pingvin eco EDE.
The serial number is zero probably because …
-
Could there be a possibility to add different modbus registers to be shown through addon?
Pingvin MDE eAir has holding register "1" (Room temperature sensor TE20) and "4" (Current exhaust fan speed…
Ta802 updated
8 months ago
-
Many units don't have this mode.
-
I have a Pandion ECO-EDE with EDA automation and the Enervent Freeway wifi module that also makes modes TCP possible. When I try to start the add-on I get the following error and the add-on will not s…
-
Looks like on my Pandion eco EDE (MB v1.97, display v2.01) the program fails to start as it gets stuck reading coil 51.
```
helmi 01 07:59:31 ubuntu node[7095]: 2024-02-01T07:59:31.252Z [main] inf…
-
Thanks for great project! :)
I have Enervent Pelican HP eAir and its connected to my LAN with ethernet cable. Unit has software version 1.29 and in Modbus settings menu it has option Modbus TCP. Af…
-
https://www.home-assistant.io/blog/2023/08/02/release-20238/#breaking-changes
https://developers.home-assistant.io/docs/core/entity/#has_entity_name-true-mandatory-for-new-integrations
-
### Describe the issue you are experiencing
Modbus not working, connection timeout.
### What operating system image do you use?
generic-x86-64 (Generic UEFI capable x86-64 systems)
### What versio…
-
Both, localhost and external broker fails.
[17:25:44] INFO: No internal MQTT service found, using addon config
Opening serial connection to /dev/serial0, slave ID 1
Connecting to MQTT broker at m…