search

Jalle19 / eda-modbus-bridge

An HTTP/MQTT bridge for Enervent EDA ventilation units
GNU General Public License v3.0
14 stars 3 forks source link

Make "eco" mode optional based on firmware version #104

Closed Jalle19 closed 6 months ago

Jalle19 commented 7 months ago

Many units don't have this mode.

Jalle19 commented 6 months ago

@juntta do you have an "eco" mode on your unit?

juntta commented 6 months ago

I used to have but when updated the firmware to support tcp connection, it was gone!

Jalle19 commented 6 months ago

My own notes regarding software versions:

2.17 pingvin eco ede 1.42 eair md juntta 1.18 ede ewind or eair (https://github.com/Jalle19/eda-modbus-bridge/issues/58) 2.01 wanha 5.54 pandion eda 1.97 elmis old ltr-6 eco ede + https://github.com/Jalle19/eda-modbus-bridge/issues/105#issuecomment-1921587905 1.94 (https://www.yumpu.com/fi/document/read/36730463/enervent-digital-automation)

ssalmela commented 6 months ago

My own notes regarding software versions:

2.17 pingvin eco ede 1.42 eair md juntta 1.18 ede ewind 2.01 wanha 5.54 pandion eda 1.97 elmis old ltr-6 eco ede

Perhaps the Wanha is also too old to remember anything and refuses write operations via Freeway connector.

Any idea if firmware can be flashed to newer version? (I did already send the question to Enervent support/maintenance)

juntta commented 6 months ago

My own notes regarding software versions:

2.17 pingvin eco ede 1.42 eair md juntta 1.18 ede ewind 2.01 wanha 5.54 pandion eda 1.97 elmis old ltr-6 eco ede

Perhaps the Wanha is also too old to remember anything and refuses write operations via Freeway connector.

Any idea if firmware can be flashed to newer version? (I did already send the question to Enervent support/maintenance)

At least Pelican model is upgradable. I had to flash firmware to support TCP connection which was possible with newer firmware.