-
### The problem
My Envoy has been online with Home Assistant for 7-days and it has stopped communicating with HA twice. When this happens all of the entities associated with it become "unavailable" a…
-
### The problem
Logger: homeassistant.helpers.entity
Bron: helpers/entity.py:1176
Eerst voorgekomen: 15:52:31 (1 gebeurtenissen)
Laatst gelogd: 15:52:31
Updating state for sensor.inverter_12162…
-
### The problem
Good morning,
I haven't used the "_ Current battery discharge_" until trying to use it just now and I noticed that its values are consistently off by 1 kW or so from what Enphase (…
-
### The problem
Same issue as in #103700 but I couldn't add a comment to it. I try to add the official integration and it spins for a moment before I get a "Cannot connect: (500, 'Timeout connecting …
-
### The problem
I am using an 3-phase Enphase Solar system with 16 panels, Production and Consumption CTs plus 2 pcs 3T batteries.
According to the documentation above I should be able to activate /…
NCO3 updated
21 hours ago
-
### The problem
After a power outage, the Enphase Envoy Energy Production Today sensor reports incorrect values of 5,000 kWh-16,000 kWh for a period of time. This causes issues with the energy dashbo…
-
### The problem
Hi all,
I am using the Enphase integration to track my solarpanels and use that data in the Energy panel.
I have noticed unusual patterns on the Energy panel in Home Assistant, …
-
He probado a conectarlo con envoy enphase y no recoge datos, ¿puede ser que enphase haya cambiado la forma de conectarse?, He probado a conectarme por api mediante postman y si que tira.
-
Hi Alex,
This is a great project. I don't have my Enphase system installed yet but I'm pretty excited and getting stuff ready and looking forward to utilizing your Envoy Logger project. So this is …
-
## Expected Behavior
Should get power/energy production values as reported in the Enphase app, not 0's
## Current Behavior
Getting 0's for all values: wattsNow, wattHoursToday, etc. from the brid…