-
**Is your feature request related to a problem? Please describe.**
NAPS2 now supports scanners with WIA, TWAIN, and ESCL drivers.
Many of the newer scanners are starting to use the ESCL protocol, bu…
zwo1a updated
3 weeks ago
-
I want to use sane-airscan for a WSD device. There are already escl devices on the same network so I want to disable the escl protocol to avoid "loops" when sharing scanners via AirSANE. I can see tha…
-
Add eSCL support to PAPPL; no publicly available specification exists, but here are some online resources:
-
-
-
-
The latter provides a SANE backend that supports scanning via eSCL and c…
-
After installation of driver package. Printer pantum 5100 adw works just perfectly with printing and scanning through default scanner program. But in my organization people have been use NAPS2 for a l…
-
I have been updating a scanner Web GUI that I made for several models of orphaned scanners thanks to a command line binary. Recently I added eSCL/AirScan support, meaning that it can take advantage o…
-
Tested on SP C261SFNw.
airscan-discover
[devices]
RICOH SP C261SFNw (3c6e19) = http://192.168.1.68:631/eSCL/, eSCL
RICOH SP C261SFNw (3c6e19) = https://192.168.1.68:443/eSCL/, eSCL
Scan starts,…
-
1 I was unable to use -p 80 option it gave me an errror
2 I think , and not sure about this but you should check /escl/ScannerStatus/ that scanner is not "Processing". Normally this says "Idle" but…
-
Hi,
Tested on Ricoh SP 220SNw. Firmware version of MFU is 1.15 (last one available)
airscan-discover
```
[devices]
RICOH SP 220SNw (f028ed) = http://192.168.1.50:631/eSCL/, eSCL
RICOH S…
-
Works when "PrinterName" = http://yourprinterip/eSCL is added to the [devices] section of /etc/sane.d/airscan.conf
No port number was needed.
mDNS and AirPrint enabled in printer web console.
…
-
I am sorry if this is not the correct place to post the following message. I have been trying to send email to pzz@apevzner.com and it fails. Can you please tell me how to contact with email so I can …