-
```sh
esptool.py --port COM6 --baud 460800 write_flash --flash_mode dio --flash_size detect 0x00000 esp01s-sec2500.bin
```
![Image](https://github.com/user-attachments/assets/6afcc150-05f9-4b2d-a3eb-…
-
Hi, I have a TFT35 V2.0 with ESP01S attached. I am connected to my home WiFi. However, it is not working to transfer files to the SD card located in TFT35. Can anyone help? Thanks
-
Please, before you create a new bug report, please make sure you searched in open and closed issues and couldn't find anything that matches.
**Printer type** - [MINI, MK4, XL]
MINI+, MK4
**Pr…
-
I'm using the SKR 1.4 Turbo I would like if the WiFi connection on the next revision of these boards had the WiFi ESP-01s connector in another place.
The reason for this would be so that you can us…
-
I have
- skr-pro 1.1
- last Marlin 2.0
- LCD 12864 - (works with last Marlin 2.0)
- ESP01S with last ESP3d web interface works, baudrate=250000
configuration.h
#define SERIAL_PORT -1
#defi…
-
Добрый день!
В ряде случаев, не нашел закономерность, после отсылки данных индикаторный светодиод LED1 не тухнет до конца - остается слабое свечение. Если дотронутся до выхода TX ESP то светодиод т…
-
Not sure if my esp is flashed OK. got the bins from 20210823 ESP8266 Wi-Fi Support Pack v1.0 by KdL as i cannot compile with arduino ide (keeps complaining with an error at bearssl certstore)
A…
-
### The problem
I installed yesterday my new IR reading head with an ESP01s running esphome for my smart meter. This new reading head with wifi is an replacement for my existing one, which was connec…
-
Hi,
I have roomba 521; I followed your instructions using ESP01S, but I have these problems:
- I don’t get status and battery charge via HA
- on 20 tentatively start via HA:
- only one roomba …
-
I used ESP Home with Home Assistant to create custom firmware.
it works when i use jumper wires (all the pins) to create some distance between the relay board and the ESP-01 module.
but when i put…