-
my esp12 connect wifi then reset. always doing that. I will send email please contact me.
atprk updated
3 months ago
-
Thanks for this nice library. I’ve tried it on ESP32 and it works well. But with ESP12F (ESP8266) it’s not working. No idea if where is the problem.
-
when I use this library my module temp is touching 50 degree but not with knolleary lebrary. I am using same code and same setup. can anyone check this with other module??
-
I had tested. not support, do you have any plan to support ?
-
Fully copied example code
https://github.com/dawidchyrzynski/arduino-home-assistant/blob/main/examples/nodemcu/nodemcu.ino
Just modified the WiFi info
```
#define WIFI_SSID "my wifi"
#def…
-
## Description of the problem
1. When I use the sketch without ws2812fx.service(); in loop() then everything works fine for several hours but when I include ws2812fx.service(); in loop() then MQTT …
-
Hi,
I've installed the esp-open-sdk on my linux.
The previously version that I've used was the SDK V1.5 and with this version working my esp12 without any problem.
Now for a new project I've insta…
-
### The problem
All was fine, but recently when I upload firmware via OTA or simply build firmware bin file, I got a bunch of compile errors, segmentation faults etc... They seem to be completely r…
-
Hello,
which pin of the ESP8266 can handle a OneWire bus? I am using ESP12e and ESP12f
I could not find any documentation
Best
-
**Issue Type** : JSON receive
**AT version** : 1.1.1.2.
**Board Type** : WizFi360-PA
**Module Type** : PA
**Condition** : TCP
**Description** :
Hello,
i use the Wizfi360 to get Wea…