-
### Hi there !
i tryed myself but only get blank white screens
i think for some dev in here it's a few minutes to fix.
*some more info :*
*from smartdisplay-demo :*
"build": {
"ardui…
-
I recently bought some of these screens (ESP32-2432s022c)
I tried configuring it based on your github but I only am able to get some distorted images on the display. ( snow pattern )
It uses ST778…
-
Have you got any further with a parallel interface TFT? [https://www.aliexpress.com/item/1005006284154750.html](https://github.com/Bodmer/TFT_eSPI/issues/url) and [https://www.aliexpress.com/item/1005…
-
SPI
Two separate SPI busses are being used for the display and the touchscreen.
spi:
- id: lcd
clk_pin: GPIO14
mosi_pin: GPIO13
miso_pin: GPIO12
- id: touch
clk_pin: GPIO…
1achy updated
6 months ago
-
After the first set up flawlessly, I got a second CYD. Unfortunately, with this one I have some display/graphics issues. The colors seem to be inverted, meaning black is white, white is black, yellow …
-
Does somebody have this version and got it running with esphome? I only have a white screen with the provided examples.
The display is a little bit smaller but other than that it looks like a CYD
-
HI, I have the above mentioned board, i mistakenly ordered the wrong screen size when ordering, but this one just gives a blank white screen on boot, the firmware is running as i can see the AP,
is i…
-
**Describe the bug**
I get this error on startup using a slightly different board (esp32 2432S022)
This board has a capacitive touch screen.
ELF file SHA256: b5a9d87e0c1e0a9d
Rebooting...
ets…